Effetto Mariposa Tubeless Rim Tape - Shop Edition - Cyclop.in

Effetto Mariposa Tubeless Rim Tape - Shop Edition

badge
badge
badge

EMCHCTPMS_M

Regular priceRs. 4,760.00
/
Tax included. Shipping calculated at checkout.

Size

Exclusive Features:

  • Easy to use
  • Superlight
  • High quality tape material and adhesive
  • Extended range of widths

Sizing Information

  • Size - M (25mm x 8mm)
  • Country of Origin - Italy

Replacing standard rim-tape, Caffélatex Tubeless Tape makes standard rims air-tight, sealing spoke holes. It allows tubeless conversion of most mountain bike wheels, using Tubeless or Tubeless-Ready tyres, Caffélatex Tubeless Valves and Caffelatex Sealant.

Easy to use:

Replacing normal rim-tape, Caffélatex Tubeless Tape easily adapts to rim internal profiles and makes standard rims air-tight, sealing spoke holes. It allows tubeless conversion of most standard wheels, using Tubeless or Tubeless-Ready tyres and Caffélatex sealant. Thanks to its low memory, it doesn’t ‘spring back’ once put down in the rim channel, for increased stability.

Adhesive strength:

State-of-the-art. The special adhesive (can stick to silicone-treated paper) doesn’t have the immediate tack of natural rubber glue used in cheaper tapes… but develops a stronger bonding over time and is much more tolerant to temperature and humidity changes and aging.

Small core:

1 inch instead of 3 inch-diameter cores of most tapes, to save space and to make it easier tensioning it while taping the rim (inserting the thumb inside the core, it happens very naturally).

Sealed packaging:

To preserve the tape properties over time, each tape is contained into a re-sealable bag.

Mounting tips:

Before gluing Caffélatex Tubeless Tape inside the rim, carefully clean the rim-bed, removing any trace of grease or lubricant. For this use alcohol or other degreaser, then – VERY IMPORTANT – clean carefully with a clean, dry cloth (adhesion on dried-up alcohol is difficult);

Use one layer for mountain (up to 4 bar) and two for road (up to 8 bar) applications;

Applying the Tape:

Start 2 cm before the valve hole applying the Tape. Our Tape is flexible but not stretchable, so it will adapt to surfaces but won’t change its lenght/width when pulled. This is a plus, as a stretched out tape will tend to move and revert to its original size over time, breaking the adhesive bond;

Keep Caffélatex Tubeless Tape tensioned while you apply it, making it stick FIRST to the center of the rim channel, making sure no bubbles and wrinkles appear. Continue on the whole circumference, always focusing on the center of the rim channel, until you get past the valve by 2 cm (you get a 4 cm double layer across the valve). If possible, avoid finger contact with the last part of the tape, to maximise adhesion on the most exposed segment of the tape;

Only in a second time, with a clean rug/cloth, push the tape down on the sides of the rim channel, on the whole circumference. That will ensure you get a perfect application.

Use a sharp spike or a screwdriver to make a round hole in Caffélatex Tubeless Tape at the valve hole. Avoid using a cutter knife and doing an “X” cut: that might prevent proper air-tightness at the valve base.

Available Sizes:

Caffélatex Tubeless Tape is available in six widths:

  • S (20,5 mm): for rims with internal width between 16 and 20 mm
  • M (25 mm): for rims with internal width between 20 and 25 mm
  • L (29 mm): for rims with internal width between 25 and 29 mm
  • Plus S (34 mm): for rims with internal width between 29 and 34 mm
  • Plus M (40 mm): for rims with internal width between 34 and 40 mm
  • Plus L (45 mm): for rims with internal width between 40 and 45 mm

Each width (S, M, L, Plus S, Plus M, Plus L) is available in two length options, 8 m and 50 m Shop rolls.To preserve the tape properties over time, each tape can be stored inside its re-sealable bag.

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Recently viewed